Radon Information Before & After Photos

This project was a hard one as we were bidding against four different people. Our lead tech Rusty, ended up selling this as well as a Breathe EZ due to bedrooms and kids being in the basement. I think it was the deciding factor from a health standpoint. The one thing that I am concerned about is the quotes that he received from other competitors. Rusty did let Eric know that we can match other companies prices if he were to give us the other quotes for our price assurance guarantee. The other issue on this house is the exit point for an exterior system would initially come out under the deck so that would mean the team would have to make a quick 90° out to the right hand side more towards the center of the home. The third complication on this home is that he is too sump pumps. One is sealed up in a wooden box and looks to be very tight so I did not mess with it. The second one is in the utility room which will need to be sealed up like normal. Rusty did let the homeowner know that we can start with a single point to see how well write all levels will drop even though he has elevated levels with a strong recommendation to put into points. Price was a pretty big factor in all this but still glad he ended us choosing us for quality.

This will be a 2-point system and two sump pits will need to be sealed up. They are both located in the utility portion of the storage area. The team will need to core through one of the walls to create an additional instruction point and encapsulation and use one of the other sump pits for an extraction point. Rusty from the team was surprised when he walked into this home and saw the size of the crawl space. There is a small storage room with paint in it and pegboard that can be taken down to access the very large crawl space. It is almost broken down into three separate areas that have access to each one of them. The customer was also looking to have the far side of the home insulated. It's the crawl space that drops down a little bit further because they seem to not be able to carry all that much heat in the area. I didn't crawl around too much further in there but could be a good opportunity to add more insulation if it was sought to be fit. The customer was looking to have the external extraction point come out of the corner of their home and was back and forth between the pond side of the house or around the corner with the bushes. The installation was quick and easy!

This was a tough account and then a thousand questions for me that I needed to answer. No harm no foul but they are very detailed individuals and it was a fight too and the sale because the homeowner his wife did not like the fact that there was only a three-day cancellation policy if they changed their mind. You know there they decided to do something and I think they're on the same page at this point. If you go down into the basement there is a small storage area to the left hand side and in that corner the homeowner would like an extraction point. They would like it run out through the ceiling through an existing dryer vent. He will be cutting an 8x8 square out of their drywall so that we will be able to run our pvc. Being at the home has right on levels around 15 to 16. And he wanted to run the second extraction point on the same well that has a television. He's not all that concerned with Aesthetics because I don't believe that they spend a lot of time downstairs. You can touch base with me if you have any questions regarding this as I believe the homeowner will be present and most likely interested in the work that you're doing.

Radon Mitigation is a Home Inspection Need

This client had an old radon mitigation installed in 2013 when the team checked, it was no longer working! Homeowner decided to have it replaced with a new one as he is planning to have the house appraised and his home inspector friend suggested to have his radon mitigation system checked first as he observed it's old age. The team installed on the same spot and educated client on how it should be maintained. He opted for a fan cover for maximum durability. 

Andrew did a great job in this install that had 4 extraction points and an encapsulation. The customer had high levels of radon and wanted to make sure the home was safe!